How to fix Yuphoria Hard brick/Bootloop.Bootloop and hardbrick problem is common which many of people face during flash any Rom or User may flash wrong file which cause bootloop.
How to fix Yuphoria Hard brick/Bootloop
Bootloop and hardbrick problem is common which many of people face during flash any Rom or User may flash wrong file which cause bootloop.
Note - This Method Will Work on Following Device.
1 Yunique
2 Yunique Plus
3 Yureka
4 Yunicorn
5 Yureka Note
6 Yutopia
7 Yuphoria
8 Yureka Plus
Bootloop and hardbrick problem is common which many of people face during flash any Rom or User may flash wrong file which cause bootloop.
1 Yunique
2 Yunique Plus
3 Yureka
4 Yunicorn
5 Yureka Note
6 Yutopia
7 Yuphoria
8 Yureka Plus
Prerequisites –
- Make sure that you have 70-80% battery on your phone.
- You need a PC and a USB cable to connect your phone to the PC.
- Flashing the factory firmware will wipe all the data present in the internal memory. So, make a backup of that if you can.
Downloads –
- Download the flash tools from here.
- Download the factory firmware from the official Click Here. Download Rom for Your Mobile....
Steps To Flash Factory Firmware –
- Extract the flashtools zip in a new folder on the desktop.
- Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
- Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
- While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
- You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
- Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
- A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
- The command window will automatically close once the procedure is completed.
- Disconnect your device and boot it up by pressing the Power button. The first boot might take around 5-10 minutes to complete.
Hope You're Problem is Solved ...
If Not Contact Us..
- Extract the flashtools zip in a new folder on the desktop.
- Extract the factory firmware zip in the same folder and make sure that all of the flashtools files are also present.
- Now, power off your phone. If you are stuck in a bootloop, then pull out the battery and reinsert it. (Do not switch on the phone.)
- While pressing the Volume Up key, connect your phone to the PC with the help of a USB cable.
- You should now see the fastboot logo on your device. If you did, leave the Volume Up key. (If you do not see the logo, retry the process.)
- Now go to the folder where you extracted the flash tools and factory firmware and run the flash-all.bat by double clicking on it.
- A command window will open and the flashing procedure will start. (Make sure that your device does not disconnect from your PC during the procedure.)
- The command window will automatically close once the procedure is completed.
- Disconnect your device and boot it up by pressing the Power button. The first boot might take around 5-10 minutes to complete.
Hope You're Problem is Solved ...
If Not Contact Us..
The flash tool link take me to yu drivers page give the flash tool download link
ReplyDeleteYes download yu flash tool for there and flash Fastboot ROM using that tool ...
Deletemy recovery page is not coming by pressing powerbutton and volume down button .It just stuck on the yuphoria logo
ReplyDeleteMy phone was in the same state as yours. I tried the above procedure. Now I'm able to use my device normally.
DeleteNote: Device data will be wiped clean. So all your mobile data is lost!!!
I searched a lot for a solution without wiping the data. But did not get any as my device was not rooted or my device not entering recovery mode to use adb commands.
Fastboot was my last resort and unfortunately I couldn't retain my device data.
Thank For Reply and Give Information .
Deletecan you help on lyf devices
ReplyDeleteBasically I Don't Any Idea About Lyf Mobile . Sorry
Deletebro where is flashtool files download link
ReplyDeletefirst link is of usb drivers and second link is of Yu ROMs.
there are no flash tools
Hi, I have yuphoria unrooted device. getting 2 error msgs 1) OEM unlock is not allowed, 2) flash write failure.. help me
ReplyDeleteHello friends my yu yuphoria device hard bricked because I'm flashed corrupted firmware file, so no response like fastboot, Charing ,ect fully dead can anybody help me.. thanks advance
ReplyDeletei have done all these steps but still my phone is in same state i.e stuck on yu logo plz help...
ReplyDeletecmd automatically closes when i start the process
ReplyDeleteBad to hear that please follow following steps.
Delete1) Make Sure you are applying this method on yuphoria 5010 or 5010 A device.
2) Make sure all drive such as ADB Installed properly (High Chance this may problem)
3) If above Solution don't work then tried to do same with another pc.
Thanks for contacting us
Keep Visiting Tech Update 🙏
Tried almost everything on the internet, but the device wont boot even after flashing stock OS.
ReplyDeleteStill stuck at boot screen.